Product center-Shenzhen Boyi Jingke Technology Co., LTD

YW15N

Liquid level detection sensor

Model YW15N Output type NPN Output Repeat distance accuracy ±0.2mm or less Detecting object Liquid Action indicator Action indicator (red) Power supply voltage 10 to 30VDC difference 0.6 to 5mm Current Consumption 12mA or less Applicable pipe wall thickness 1.5mm or less φ6 to φ13mm protection circuit Surge protection circuit, short circuit protection, polarity Reverse protection Vibration (durability) 10~55HZ up and down amplitude 1.5mmX, Y, Z 2h in each direction Impact (durability) 500m/sXYZ three times in each direction Protection Construction IP66 connection mode Lead out type (standard cable length 2M)
YW30N

Liquid level detection sensor

Model YW30N Output type NPN Output Repeat distance accuracy ±0.2mm or less Detection object Liquid Action indicator Action indicator (red) Power supply voltage 10 to 30VDC difference 0.3 to 3mm Current consumption 12mA or less Applicable pipe wall thickness 2mm or less φ14 to φ26mm Protection circuit Surge protection circuit, short circuit protection, polarity reverse Protection vibration (durability) 10~55HZ up and down amplitude 1.5mmX, Y, Z 2h in each direction Impact (durability) 500m/sXYZ three times in each direction Protection Construction IP66 connection mode Lead out type (standard line length 2M)
YW-613

Liquid level detection sensor

Model YW-613 Output Type NPN Output Action mode ON when the light is blocked ON when the light is on the light mode Detects the liquid in the pipe of the object (if the liquid has high viscosity or suspension, it may not be detected) Action indicator Red Status indicator. Green output indicator Power voltage 12~24VDC Connection mode Lead out Standard conductor length 2m Average current consumption less than 30mA, The maximum value below 80mA is suitable for the transparent conduit light source GaAs infrared light-emitting diode (940mm) with an outer diameter φ6-13mm (thickness 1mm). Vibration (durability) 10~500HZ single amplitude 1.0m
PUD-050NP

Label sensor

Model PUD-050NP Output type NPN Output detection object non-transparent label Detection Distance 2mm Response frequency 10KHZ Control output Black line: NPN output white line: PNP output power supply voltage 10-30VDC Consumption current 40mAmax light source Infrared LED Ambient brightness Sunlight: 5000lxmax; Incandescent lamp: 3000lxmax Ambient humidity Operation: -35~85%RH, storage: -35~85%H Ambient temperature operation: -20~70℃ Storage: -25~75℃ (no icing, no condensation) protection structure
PUD-100NP-M8

Label sensor

Model PUD-100NP-M8 Output type NPN+PNP Detection object Non-transparent label, semi-transparent label gap 2mm Response time less than 100us Vibration resistance 10-55HZ Double amplitude: 1.5mm, XYZ is 2 hours output state, NPN and PNP are output at the same time, On On off Switchable power supply voltage 12-24VDC±10% Floating P-P10% Current consumption less than 20mA Outlet mode M8 Aviation plug Ambient temperature/humidity -20 to 55 ° C, 35% to 85% relative humidity IP Protection level IP65 indicator Red
PUD-200NP

Label sensor

Model PUD-200NP Output Type NPN Output slot Width 0.5mm0.35mm slot depth 85mm Frequency 5KHZ Response time 0.1ms Supply voltage 10-30V Consumption current ≤25mA Consumption current 25mA Control output 1NPN transistor collector output, normally open and 1PNP transistor collector output, Normally on function Direction reversible output current 100mA Sensitivity key Intelligent adjustment Reference key Intelligent adjustment protection Reverse polarity protection, output short-circuit protection Red balance reference indicator Yellow Sensitivity high/low indicator Green signal Output indicator Connection port M12 Connection
BO-01R

Cylinder sensor

Model BO-01R Switch logic SPST Normally open switch with contact reed tube type Operating voltage 5-240VDC/AC Internal consumption current No leakage current No operating Temperature range -10 to 70°C Residual voltage drop 2.5VMax@100mADC Indicator Red LED Maximum switching current 100mAMax maximum switching capacity 10 WMax
BO-01RNC

Cylinder sensor

Model BO-01RNC Switch logic SPST Normally closed switch type with contact coil type Operating voltage 5-240VDC/AC Internal consumption current No leakage current No operating Temperature range -10 to 70°C Residual voltage drop 2.5VMax@100mADC Indicator Red LED Maximum switching current 100mAMax maximum switching capacity 10WMax
BO-03R

Cylinder sensor

Model BO-03R Switch logic SPST Normally open switch with contact reed tube type Operating voltage 5-240VDC/AC Internal consumption current No leakage current No operating Temperature range -10 to 70°C Residual voltage drop 2.5VMax@100mADC Indicator Red LED Maximum switching current 100mAMax maximum switching capacity 10 WMax